Forums » Grassroots Motorsports » If you were going to build a dyno queen... 1 2 3 4

• 

  Sept. 28, 2010 5:34 p.m. Taiden Reader

  One day I was at a local dyno day, and a guy rolled up in a completely stock looking accord. Stock exhaust, stock wheels, stock stance, stock everything except I noticed he had RT615s on 14s.

  Everyone was laughing behind his back when he went to strap up. Then the exhaust cutout opened up.

  He put down 320 whp. Everyone was like ........ ......

  So, if you had infinite money, and were going to build a car for the strict purpose of totally surprising people at dyno days, and sucking the doors off unexpecting people (on the drag strip of course), which car would you pick?

  Sky is the limit

• 

  Sept. 28, 2010 5:35 p.m. MrJoshua SuperDork

  Something like a mid 80's Buick century, wire wheel hubcaps and everything.

• 

  Sept. 28, 2010 5:38 p.m. Keith SuperDork

  

  North of 400 hp at the wheels, never less than 350 "torques".

  Square left in 50 caution ocean!

• 

  Sept. 28, 2010 5:44 p.m. njansenv HalfDork

  My old SRT-4 swapped first gen neon was fun. Stock appearance down to the wheels, ~290whp and 350 wtqs. Not a 'dyno queen' by any stretch, but it certainly surprised people.
  

  Nathah

• 

  Sept. 28, 2010 5:46 p.m. bigbens6 New Reader

  miata with the vett swap, then build said vett (cams, porting, blah blah blah) and a 200 shot of nos... hahahahaha you MIGHT be able to WOT in 5th gear without spinning on slicks....

• 

  Sept. 28, 2010 6:13 p.m. Taiden Reader

  I would want to do a stock 92 Sentra XE four door in gold, with a built SR20VET setup with a gt35r and a big ol shot of nitrous.

  Kind of like my old sleeper but with 600 whp instead of 180.

  

  

  

• 

  Sept. 28, 2010 6:20 p.m. BoxheadTim Dork

  Mercedes W116 S-Class Turbodiesel

  Sanity is vastly overrated.

• 

  Sept. 28, 2010 6:22 p.m. triumph5 HalfDork

  2wd Jeep Cherokee with Vortex supercharger-fed Hemi with 200 shot of NOs. Halway through the dyno run,, open up the electric exhaust cut outs...

• 

  Sept. 28, 2010 6:23 p.m. Knurled HalfDork

  

  But instead of a car, put it in a full size van.

  We did do a 408-ish cid Mopar (Magnum engine) for a work van. He installed the headers himself, which was good because nobody makes headers for a van, with good reason. Much metal bashing and cutting needed to be done... Anyway, the stock barrel intake manifold limited power to about 300hp but the torque on this engine was disgusting. Like, roll into the throttle too hard at 50mph and it'd break the tires loose, without downshifting, kind of disgusting. It's a riot.

• 

  Sept. 28, 2010 6:26 p.m. coll9947 New Reader

  I see your 320hp Accord sleeper and raise you this.

• 

  Sept. 28, 2010 6:28 p.m. ScottRA21 Reader

  Eaaaaasy:

  Take SRT-4 engine, coupled with some upgrades, and drop it into this:

  An 80's Dodge 600.

  No one, ON ONE would suspect anything until it was too late :D

• 

  Sept. 28, 2010 6:40 p.m. mndsm Dork

  Make that into a wagon with the wood paneling, and we have a ballgame.

  Go fast or go broke.

• 

  Sept. 28, 2010 6:43 p.m. Strizzo SuperDork

  i've seen a few older chevy duallies with worked over 454s and slicks tucked under the fenders at the track, would probably be cool to build one from a newer truck with the modern diesels. i've seen stockish ones run in the low 14s, and they can put down monster numbers on the dyno.
  

  for cars, i'd build something with an all motor K20. someting about 11k motor screaming through the revs

• 

  Sept. 28, 2010 6:44 p.m. mndsm Dork

  Keith wrote: North of 400 hp at the wheels, never less than 350 "torques".

  y'all ever made one o' them LS-Miatas with a supercharger? Methinks a twin screw under a slightly sectioned hood would be hilarious.

  Go fast or go broke.

• 

  Sept. 28, 2010 6:47 p.m. ZOO Dork

  Keith wrote: North of 400 hp at the wheels, never less than 350 "torques".

  I'm not really a two-tone colour kind of guy, but I like that

  1990 Miata, 1998 M3, Locost in progress

• 

  Sept. 28, 2010 6:55 p.m. Taiden Reader

  coll9947 wrote: I see your 320hp Accord sleeper and raise you this.

  650whp and 460 ft-lbs of torque at 29 PSI (still on stock cams)

  
• 

  Sept. 28, 2010 7:06 p.m. Knurled HalfDork

  mndsm wrote: y'all ever made one o' them LS-Miatas with a supercharger? Methinks a twin screw under a slightly sectioned hood would be hilarious.

  The engine I posted above basically fit anywhere a standard Gen III would.

  In an all-up 4th-gen F-body, it was good for low 10s at nearly 140mph. Full interior. Full accessories, meaning functional airbags, ABS, A/C, power windows and locks, cruise control... everything. Pump gas. OBD-II compliant. Street tires (albeit biiig ones). So, let's say 3600lb. (Trap speed calcs have it at about 800hp...)

  What would it be like at 2500?

  That's not much of a dyno queen, and while quiet, it definitely didn't sound like a B6 engine, and 315-width tires are a little hard to stick under a Miata...

• 

  Sept. 28, 2010 7:11 p.m. Zomby woof Dork

  Easy. Cobalt 4 door loaded with GM performance parts.

• 

  Sept. 28, 2010 7:15 p.m. Toyman01 SuperDork

  This.

  

  A computer once beat me at chess, but it was no match for me at kick boxing.

• 

  Sept. 28, 2010 7:27 p.m. RossD Dork

  + + =

  (Might not be 'my ultimate' but sure would be cool)

  The previous statements are not endorsed by Grassroots Motorsports or their sponsors.

• 

  Sept. 28, 2010 7:37 p.m. Giant Purple Snorklewacker SuperDork

  Looks nice... maybe packing some grunt - what 500wHP?

  Try... 572 cc big block, gobs of boost... 2000HP !!!

  Lord of drivel and harbinger of Floundering

• 

  Sept. 28, 2010 7:47 p.m. Appleseed SuperDork

  Are we talking dyno queens or sleepers?

  I didn't know you could drive a MKIV Supra. I thought they were all permanently attached to dyno rollers.

  

  If its a sleeper, make an Evo look like a regular Lancer.

  
• 

  Sept. 28, 2010 7:49 p.m. Hal Dork

  <------

  I already have mine: My Focus

  2010 Transit Connect XLT 2001 Ford Focus with a little help from Powerworks

• 

  Sept. 28, 2010 7:55 p.m. Taiden Reader

  Hal wrote: <------ I already have mine: My Focus

  Hey is that a 2.3L duratec? Back in the day I was looking for one, because it seemed that a lot of guys were seeing HUGE gains with boltons.

• 

  Sept. 28, 2010 8:00 p.m. JFX001 SuperDork

  2002 Focus wagon with Kugel V8 conversion.

  Easy like Sunday Morning.

1 2 3 4  

You'll need to log in to post.